Weather Station

Product Name Decription Details

HLxxWIN Datalogger Support Software：
 a. Program Editor
b. Real Time Monitor Mode
c. Terminal emulator
d. Auto-polling for multiple remote stations
e. Communication supports
f. Simple operation mode

TERM8W Datalogger Support Software：
 a. Windows® Graphic Interface
b. Charts, Graphs and Reports
c. Wind Rose Charts
d. Database Editor
e. Program Editor
f. Auto Polling - Unlimited Remote Sites
g. Real Time Data Values and Real Time Gauges Display
h. Foreign languages

HLxx Light Datalogger Support Software： a. Program Editor
b. Real Time Monitor Mode
c. Terminal emulator
d. On-line new & history data view
e. Communication supports
f. Simple operation mode

HL20 Data acquisition system： a. 20 single-ended or 8 differential analog input channels
b. Expandable to more than 200 channels
c. 4 excitation voltage outputs
d. 4 pulse input channels
e. 6 digital control outputs
f. Low power consumption
g. Optional EEDSU data storage unit

HL20-A Data acquisition system： a. 20 single-ended or 8 differential analog input channels
b. Expandable to more than 200 channels
c. 4 excitation voltage outputs
d. 4 pulse input channels
e. 6 digital control outputs
f. Low power consumption
g. Optional EEDSU data storage unit

EEDSU Data Storage Unit a. Data storage capacity : > 350,000,000 data points
b. Power requirements : 12VDC ( 7 to 30 VDC )
c. Power consumption : < 15mA ( @12.6VDC ) in average.
d. Baud rate : Data transfer is 9,600 baud.
e. Temperature operating range : -25℃to +70℃
f. Dimension : 6.7cm * 6.7cm * 2.8cm

CEM416A Channel expansion module： a. 48 single-ended or 32 differential input channels
b. 16 full bridge input channels

VWA-1 VW to Analog Converter
a. Frequency range: 400 – 6000 HZ
b. Resolution: 24 bits
c. Response time: @ 0.5S ( @ 500mS ) after power-on
d. VW to Analog channel no.: 1 channel (VW)
e. Analog output: 0 – 2 VDC (VW)
f. Power requirement: 9 – 15 VDC
g. Dimension: @ 16 cm (L) x 6 cm (W ) x 2.7 cm (H)

HP2 Power Switch Module：
 a. Channel number: 2
b. Control principle: none-contact switch
c. Control voltage: High: 5 VDC, Low: 0 VDC
d. Input power: 12 VDC ( < 50 VDC )
e. Output power: 12 VDC
f. Current drain: < 0.05 mA
g. Nominal load: < 1.5 A @12VDC

VS7 Logger & sensor series : a. 5 analog input channels
b. 2 potentiometer input channels
c. 3 pulse input channels
d. 2 continuous 5V & 12V power outputs
e. 16 characters by 2 line LCD display w/3 buttons
f. Adjustable logging interval from 1s up to 10+ hrs
g. 2 gigabyte data storage ( SD Card )

EE-04 Wind Sensor a. Measuring range:Wind speed: 0 - 75 m/s
Wind direction: 0 - 360 °
b. Accuracy: Wind speed: ±1 m/s( 0-20m/s )
±5% ( >20m/s )
Wind direction: ±7 °
c. Signal output: Wind speed: magnetically switch
Wind direction: potentiometer

03002 Wind Sentry Anemometer and Vane:
 a. Measuring range: Wind speed: 0 – 50 m/s
Wind direction: 0 – 360 °
b. Accuracy: Wind speed: ± 0.5 m/s
Wind direction: ± 5 °
c. Signal output: Wind speed: magnetically induced AC voltage
Wind direction: potentiometer
d. Options: 03002V WS&WD: 0 – 1 VDC outputs
03102V WS: 0 – 1 VDC output
03302V WD: 0 – 1 VDC output

05103 Wind monitor： a. Measuring range: Wind speed : 0 - 100 m / s
Wind direction : 0 - 360°
b. Accuracy: Wind speed : ± 0.3 m / s or 1% of reading
Wind direction : ± 3°
c. Signal output: Wind speed : magnetically induced AC voltage
Wind direction : DC voltage - potentiometer
d. Options : 05103V with 0 - 5 VDC outputs
05103L with 4 - 20 mA outputs

MP101A Temp. / RH probe：
a. Measuring range:
Temperature : -40℃ - +60℃
Humidity : 0 - 100%
b. Accuracy:
Temperature : ± 0.3℃
Humidity : ± 1.5% ( 10 - 95% )
± 2.5% ( ＜10% or ＞ 95% )

111N&222N Temp./RH probes:
a. Measuring range:
Temperature: -40 ℃ to + 60 ℃
Humidity: 0 - 100 %
b. Accuracy:
Temperature: ± 0.3 ℃ (-20 ℃ to + 40 ℃ )
± 0.5 ℃ (-40 ℃ to + 60 ℃ )
Humidity: ± 3 % (0 - 90 %)
± 5 % (90 - 98 %)

TH-46 Temp./RH probe: a. Measuring range:
Temperature: -40 ℃ to + 60 ℃
Humidity: 0 - 100 % RH
b. Accuracy:
Temperature: ± 0.15 ℃
Humidity: ± 1.0 % RH

888 & 884 Solar radiation shields:
 a. Material: UV stabilized white thermoplastic plates
b. Principle: Natural ventilation
c. No power required
d. 888: 8 plates
e. 884: 4 plates

E20 Sillicon pyranometer： a. Spectral range: 400 - 1100 nm
b. Sensitivity: 48 uV / W / m2
c. Linearity: 1% up to 3000 W / m2
d. Accuracy: ± 3 %
e. Response time: typical 3 uS

LP02 Pyranometer： a. Spectral response: 305 - 2800 nm
b. Sensitivity: 10 - 40 uV/ W/ m2
c. Non - stability: < 1% change per year
d. Non -Linearity: ± 2.5 %
e. Response time 95 % : 18 Sec
f. Temperature range: -40 ℃ to + 80 ℃

SR11 First Class Pyranometer a. ISO classification: First Class
b. Spectral response: 305 – 2800 nm
c. Sensitivity ( nominal ): 15 uV/W/m2
d. Range: 0 – 2000 W/m2
e. Temperature dependence: < 0.1%/℃
f. Temperature range: -40℃ to +80℃
g. Calibration traceability: WRR

NR01 & RA01 Net Radiation – Pyrgeometer sensors
NR01 & RA01 Specs:		 General:
a. Temperature range: -40℃ to +80℃
b. Range: 0 – 2000 W/m2
c. Temperature sensor: Thermister
d. Temperature sensor: users own preference can be plugged in
Pyranometer ( Short Wave ):
a. Pyranometer ISO classification: Second Class
b. Spectral response: 305 - 2800 nm
c. Calibration traceability: WRR
Pyrgeometer ( Long Wave ):
a. Spectral response: 4500 – 50000 nm
b. Calibration traceability: NIST
c. Window heating offset @ 1000 W/m2 solar radiation: < 15 W/m2
d. Heating power: 5 Watt @ 12VDC

MS-020VM Pyranometer： a.Spectral response: 400 – 1100 nm
b.Signal output: 0 – 1 VDC
c.Measuring range: 0 – 1400 W/ ㎡
d.Accuracy: < 4%
e.Response time: < 50 ms
f.Power supply: 12 – 24 VDC/7mA

BP0611A Barometric Pressure sensor: a.Measuring range:630 – 1130 mBar or hPa ( 18.6 – 33.4in. Hg ).
b.Resolution: Infinite.
c.Operating Temp.:-40ºC to + 85ºC.
d.Temp. Compensatedrange: 0ºC to + 70ºC.
e. Accuracy: ±0.125% FS
f.Power requirement:10 – 24VDC.
g. Current Consumption: Active 5mA @12VDC
                                             Static 1.1mA @12VDC.
h.Signal output: 0 - 2 VDC.

E90 Quantum sensor： a. Spectral range:  400 - 700 nm
b. Sensitivity:  2.7mV  per 1000 umols-1m-2
c. Linearity:  1 %  up  to  10,000 umols-1m-2
d. Accuracy:  ± 4 %
e.Stability: < ± 2 %  change over a 1 year period
f. Response time: typical 1 uS